How do I set additional IPs in Windows? Print

  • 115

Basic

Here is the simplest way of binding your additional IPs:

  1. Login to Remote Desktop
  2. Go to Control Panel-> Network Connections -> Local Area Connection (make sure that the IP on this connection is not 10.*. If it is, use the other Local Area Connection)
  3. Right-click on Properties
  4. Select Internet Protocol (TCP/IP)
  5. Click Properties
  6. Click Advanced
  7. Click Add and add the new IPs with the correct Subnet Mask

Advanced

If you are adding multiple IP addresses, you can also use the following in the command prompt.

FOR /L %I IN (x,1,y) DO netsh interface ip add address "Local Area Connection 2" 216.245.218.%I 255.255.255.224
  • x = The starting octet. This should be the one after your primary. (0.0.0.x)
  • y = The ending octet. Your last available IP.

      You will need to change "216.245.218." and "255.255.255.224" to match your IPs and subnet.


Was this answer helpful?

« Back